What is the cause of the hoist motor not running

2020-07-15 14:09:45

The development process of the electric control system of the hoist should be a new type of equipment with unmanned, networked, remote control and full automation. The features of frequency conversion electric control for mining are as follows:

1. FX2N PLC is used as the main control device of the console. It is designed and manufactured in full accordance with the requirements of GB / T17626 electromagnetic compatibility standard.

2. Because the control system is controlled by PLC, it is easy to realize the locking control of the main belt conveyor and the front and rear equipment.

3. Through real-time detection of the speed of the conveyor, the main console controls the brake action of the conveyor at zero speed, and automatically holds the brake, so as to avoid the over-current of the conveyor's trolley, frequency converter and motor.

4. The frequency converter is used to complete the start-up and speed regulation of the motor, which can realize the stable start-up and speed regulation requirements of the belt conveyor. Besides, it has obvious energy-saving effect under the condition of long-time and low-speed operation (such as transportation, rope inspection and belt inspection).

5. Through the network platform, the frequency converter can realize the automatic data exchange, has the function of automatic adjustment of operation parameters, has good dynamic follow-up of the master and slave motors, and ensures the power balance of multiple motors.

6. The system has comprehensive fault monitoring and reliable fault alarm protection functions. With over-voltage, over-current, under voltage, short circuit, grounding, overheating and other protection functions.

7. It has the function of low-speed band inspection. The belt inspection speed is 0.2 M / S ~ ve rated speed adjustable.

As the necessary lifting winch for ore construction, it must ensure the perfection of its electric control equipment, realize the numerical control and intelligent control of the mine, ensure the safe and efficient operation, output high production resources, and lay a good foundation for the new digitalization of the mine in the future.


Huge-lift Founded in 2004,Ningbo Lift Winch Manufacture Co.,Ltd covers an area of 10,000 square meters,gross floor area 18,000 square meters.Our product line includes: ATV/UTV winches, Off-Road Winch, Boat Winch, portable hand winches,DC small hoists,and accessories for off-road vehicles.