Web Menu

Product Search

Language

Share

Home / News / Company News / Electric winch installation is divided into 4 steps

Company News

Categories
Recent Posts
Contact Us
Electric winch installation is divided into 4 steps
The electric winch installation method is very simple, easy to learn, and easy to understand.
1. First of all, we should understand the electric winch is divided into several parts, first of all, the bottom plate of the row of rope using screws fixed in the row of rope above.
2. Row rope and iron plate installed, the iron plate partially installed in the car electric winch base above, by the holes for the use of screws to fix.
3. vehicle's electric winch and base are installed, the need to put down the wire rope, at this time, the need to dismantle the row of ropes inside the 2 guide pulleys, a manual rotation of the clutch, the other hand to the outside of the tugging rope, rope down to a certain length, and then the 2 guide pulleys installed in the row of rope inside the device, and screws installed can.
4. After the above three steps are installed, the cable handle needs to be wired, this step is very important, first of all, the motor on both sides of the two terminals by red and black for installation, and the terminals above the spacer and the screws, the first screws and spacers to dismantle down, the red or black line set with the terminals above, and will be the spacer and the screws can be fixed to.
Previous Post No previous article

Contact Us

Hot Products